Description
Rain-soaked service trucks and crowded work vans demand the space-saving Xtend and Climb Telescoping Ladder. This Type IA 300-lb tool extends out to 14.5 feet and collapses down to 36 inches. Aerospace aluminum tubing resists jobsite impacts. The dual locking tab pins secure each rung, though grit inside lower collars can slow section retraction.
Manufactured from high-strength 6061-T6 aluminum alloy tubes with clean anodized finishes, the stiles resist oxidation and jobsite grime. Internal locking components use cold-rolled steel pins encased in glass-reinforced polymer collars. Heavy-duty angled rubber feet anchor the bottom stiles against floor slip. The bare ladder weighs 36 lbs unboxed, stands 36 inches high collapsed, and maintains a base width of 20 inches for compact storage behind truck seats.
Key Features of Xtend and Climb XXC714-300
Commercial roof inspectors buy Xtend and Climb XXC714-300 units to reach building parapets through tight indoor ceiling hatches. This commercial telescoping ladder fits inside compact car trunks where traditional rigid extension ladders cannot go.
- Telescoping aerospace aluminum tubes extend section by section up to 14.5 feet.
- Type IA 300-lb duty rating supports inspectors carrying diagnostic electrical testing tools.
- Visual red and green lock tabs confirm full mechanical pin engagement at each rung.
- Integrated ergonomic carrying handle balances the thirty-six-pound frame during one-man walking transit.
- Anodized metal finish stops aluminum oxide transfer from staining worker hands and clothing.
- Deep ribbed aluminum rungs provide traction under wet, muddy, or greasy work boots.
- Angled molded rubber feet grip sealed warehouse slabs and polished commercial vinyl tile.
Telescoping Tube Deflection Shear
Bench testing subjected the extended fourteen-foot stiles to a 300-lb static center load at a seventy-five-degree lean angle. Mid-rail deflection measured 1.28 inches, showing complete elastic return without metal yield. Hardened steel lock pins sustained 900 lbs of proof shear force without collar failure. Visual indicator tabs moved from red to green with fifteen pounds of extension pull force. Internal slide clearances held within six mils, keeping section wobble minimal during high climbs.
Field Operation Realities Limits
Collapsing the ladder requires two thumbs on the release latches while controlling downward section drop with your arms. Do not buy this conductive aluminum ladder for live electrical utility line maintenance, commercial concrete sandblasting, or rough masonry tuckpointing where heavy abrasive grit fills the sliding collar gaps.
- Wipe aluminum tubes clean with a dry silicone cloth before retracting ladder sections.
- Check indicator window mechanisms each month to ensure green tabs show full internal pin seating.
- Inspect angled rubber base feet for uneven wear patterns, cracks, or split rubber cups.
Xtend Climb Factory Warranty Details
Xtend and Climb provides a 6-Month commercial warranty covering manufacturing defects and structural materials. The factory carton includes the XXC714-300 telescoping ladder, heavy-duty hook and loop transport strap, pre-mounted non-marring rubber feet, and the official ANSI operating manual.