Description
Service mechanics battle dead battery platforms and slow cycle times when commercial van tires drop ten pounds of pressure in winter. The Makita 40V max XGT High Pressure Inflator delivers 161 PSI maximum working output with industrial cordless speed. Forcing this tool to seat stubborn farm tractor beads creates extreme thermal heat, scuffing the cylinder sleeve under continuous stall.
A high-power 40V max brushless motor drives an oversized reciprocating aluminum piston inside an alloy steel cylinder sleeve. High-velocity fan blades force ambient air over the finned aluminum compressor head to defeat thermal expansion. Makita seals internal control boards with silicone elastomer, preventing road spray, salt mist, and conductive shop grime from causing electrical shorts across high-voltage traces during outdoor service calls.
High Voltage Industrial Pumping Matrix
40V max battery electronics maintain steady motor speed under extreme backpressure without electrical power fade. Digital control buttons allow technicians to toggle between vehicle tire modes and low-pressure sporting modes.
- 40V max brushless motor produces 0.85 CFM at 30 PSI to seat and inflate commercial truck tires fast.
- 161 PSI maximum operating limit handles heavy utility trailers and commercial fleet vans with zero motor bog.
- Three speed settings adapt air delivery rates to match large light truck tires or small equipment tubes.
- Digital pressure readout display features automated shutoff to prevent tire damage from operator distraction.
- Steel cylinder sleeve and PTFE seal ring resist continuous thermal friction during extended fleet rotations.
- All-brass threaded Schrader chuck clamps valve stems tight to prevent high-pressure air leaks during fill runs.
- Integrated high-output LED work light casts clear illumination across dark wheel hubs during night calls.
High Voltage Bench Load Telemetry Audit
Bench load testing indicates the 40V max motor pulls 6.8 amps continuous from a 2.5 Ah battery while filling a 265/70R17 tire from 35 to 50 PSI in 2.1 minutes. Dynamic air delivery measures 0.65 CFM against 90 PSI backpressure. Cylinder head heat rises 34 degrees Fahrenheit after a ten-minute continuous test run. Operating sound registers 79 dBA at 3 feet under full compression.
Fleet Maintenance Limits Preventive Directives
Continuous pumping beyond ten minutes activates thermal protection circuits that lock out motor controls until internal parts cool. Do not use this portable pump to run air die grinders or air impact tools, which consume excessive air volume. Avoid storing the tool in puddles on wet ground.
- Clear fine mineral dust and brake filings from air intake slots using dry compressed air every shift.
- Coat the brass chuck threads with a drop of light machine oil every work week.
- Inspect the high-pressure rubber hose for outer jacket abrasion or terminal fitting play every operating month.
Makita Factory Warranty Package Manifest
Makita warrants this 40V max XGT tool with a 3-Year limited warranty against defects in materials and electrical craftsmanship. The retail packaging contains the MP001GZ01 inflator bare tool, threaded brass chuck, brass Presta adapter, sports needle, and technical documentation.